Related Manuals for Rockler Gold Fancy Summit Pen Kit
Summary of Contents for Rockler Gold Fancy Summit Pen Kit
- Page 1 Gold Fancy Summit Pen Kit Instructions Effective January 2020 Review full instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.
- Page 2 This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the Gold Fancy Summit Pen Kit: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS.
- Page 3 Upper Tube (short) Lower Tube (long) Mandrel Replaced with 10.3mm bushing in step 3 12.7mm 12.7mm 12mm 9.1mm 3/16" tenon Fancy Summit Bushings Mandrel Setup Blank Preparation 1. Cut the blanks about 1/8" longer than the Brass Tubes to allow for blowout or hole elongation. Maintain grain orientation of the two blanks for turning by drawing a line lengthwise across the cut line.
- Page 4 Filigree (8) or Center Band (5). Check Rockler.com for updates. If you have further questions, please contact our Technical Support Department at 1-800-260-9663 4. From the tenon end, slide the Filigree (8) onto the blank or support@rockler.com...
Need help?
Do you have a question about the Gold Fancy Summit Pen Kit and is the answer not in the manual?
Questions and answers