Rohde & Schwarz R&S NRP Series Getting Started page 51

®
R&S NRP Series
TCPIP::<IP address or hostname>[::<LAN device name>][::INSTR]
● TCPIP designates the network protocol used
● <IP address or hostname> is the IP address or host name of the device
● [::<LAN device name>] defines the protocol and the instance number of a sub-
instrument:
● [::INSTR] indicates the power sensors resource class (optional)
The IP address or hostname is used by the programs to identify and control the
sensor. While the hostname is determined by settings in the sensor, the IP
address is assigned by a DHCP server when the sensor requests one. Alterna-
tively the IP address is determined with a procedure called Zeroconf.
You can also assign a LAN device name which defines the protocol characteris-
tics of the connection. See the description of the VISA resource string below for
the corresponding interface protocols. The string of the LAN device name is
emphasized in italics.
HiSLIP
TCPIP::<IP address or hostname>::hislip0[::INSTR]
● hislip0 is the HiSLIP device name, designates that the interface protocol
HiSLIP is used (mandatory)
hislip0 is composed of [::HiSLIP device name[,HiSLIP port]] and must be
assigned.
For details of the HiSLIP protocol, refer to
on page 52 .
VXI-11
TCPIP::<IP address or hostname>[::inst0][::INSTR]
● inst0 is the LAN device name, indicating that the VXI-11 protocol is used
(optional)
inst0 currently selects the VXI-11 protocol by default and can be omitted.
For details of the VXI-11 protocol, refer to
on page 52 .
Socket Communication
TCPIP::<IP address or hostname>::port::SOCKET
● port determines the used port number
Getting Started 1419.0170.02 ─ 12
Remote Control Interfaces and Protocols
Chapter 7.2.3, "HiSLIP
Chapter 7.2.2, "VXI-11
Ethernet Interface
Protocol",
Protocol",
51