F4. (Clp-370/340) Split Mode Functions - Yamaha Clavinova CLP-100 Owner's Manual

F4.
(CLP-370/340)
Split Mode Functions
This menu enables you to make various
detailed settings for Split mode.
By changing the split point or other setting,
you can optimize the settings for the songs
you play.
1. Select the voices in Split mode, then engage
the Function mode and select
2. Press the [+/YES] button to engage the Split
mode function's sub-mode, then use the
[TEMPO/FUNCTION ▼, ▲] buttons to select
the desired sub-mode. Press the [–/NO] [+/
YES] button to assign values.
NOTE
If Split mode is not engaged,
and you will be unable to select Split mode functions. Also note
that you must exit Function mode before you can engage Split
mode.
Sub-mode
F4.1: Split Point
Setting range: The entire keyboard
Normal setting: F 2
Set the point on the keyboard that separates the right and
left-hand sections (split point). The pressed key is
included in the left-hand range.
• Instead of pressing the
[–/NO] [+/YES]
can engage the split point by pressing the appropriate
key on the keyboard.
• If Function mode is not engaged, you can change the
split point to any other key by pressing the key while
holding the [SPLIT] button (page 27).
• An example of a key name indication for a split point
(F 2) (G2)
followed by
a high bar if sharp
F4.2: Split Balance
Setting range:
0 – 20 (A setting of "10" produces an
equal balance between the two Split
mode voices. Settings below "10"
increase the volume of the left voice
in relation to the right voice, and set-
tings above "10" increase the volume
of the right voice in relation to the
left voice.)
Normal setting: Different for each voice combina-
tion.
.
will appear instead of
buttons, you
followed by
a low bar if flat
The volume level of the two voices combined in Split
mode can be adjusted as required. You can make this
setting for each combination of voices individually.
F4.3: Right Voice Octave Shift
F4.4: Left Voice Octave Shift
Setting range: –1, 0, 1
Normal setting: Different for each voice combination
You can shift the pitch up and down in octave steps for
the Right Voice and Left Voice independently. Make a
setting depending on the note range of the songs you
play. You can make this setting for each combination of
voices individually.
F4.5: Right Voice Effect Depth
F4.6: Left Voice Effect Depth
Setting range:
0 – 20
Normal setting: Different for each voice combination
These functions make it possible to individually set the
depth of the effect for the left and right Split mode
voices.
The effect depth settings cannot be changed unless the
is ON. You must exit Function mode before
[EFFECT]
you can turn on an
[EFFECT]
You can make this setting for each combination of voices
individually.
F4.7: Damper Pedal Range
Setting range: ALL (for both voices)
1 (for the right Voice)
2 (for the left Voice)
Normal setting: ALL
The Damper Pedal Range function determines whether
the damper pedal affects the right voice, the left voice, or
both the left and right voices in Split mode.
F4.8: Reset
This function resets all Split mode functions to their
default values. Press the [+/YES]
ues.
NOTE
SHORTCUT:
You can jump directly to Split mode functions
[TEMPO/FUNCTION] button while holding the [SPLIT] button.
To exit Function mode, you still need to press the [TEMPO/FUNC-
TION] button so that the TEMPO indicator lights up.
CLP-370/340/330, CLP-S308/S306 Owner's Manual
Detailed Settings – [FUNCTION]
.
button to reset the val-
by pressing the
65