How To Change Or Delete A Programmed Recording (Timer) - Yamaha DRX-2 Owner's Manual

Timer
Timer List
Date Ch. Start End
01/22 01 04:25PM 06:05PM M2
--/-- ----- --:-- --:--
Total record time: 01:40
To change
Press > Press TIMER
Programming a recording (TIMER)
9
Switch off with B/I.
The programmed recording will only function properly if the DVD recorder has
been switched off using the B/I button.
If any of the TIMER blocks are in use, "TIMER" will light up on the recorder display.
How to change or delete a
programmed recording (TIMER)
1
Switch on the TV set. If required, select the programme number for the DVD
recorder (channel 3 or 4).
2
Press TIMER on the remote control.
The programming mode selected last is marked.
3
Select "Timer List" using w or v and confirm with u.
4
Select the programmed recording (TIMER) you want to check, change or delete
with w or v.
Rec
Mode
---
Delete programmed recording
1 Press the CLEAR button.
2 Confirm with ENTER/OK. "Timer Cleared" will briefly appear on the TV
screen.
To exit
"-- ---" appears rather than the displayed values
3 To end, press TIMER.
5
Press u.
Select the input field with t or u.
If required, change the information with v, w or the number buttons 0..9.
6
Confirm with ENTER/OK.
7
To end, press TIMER.
8
Switch off with B/I.
Tip
56