Fault
Playback sound is muffled and high
frequencies are inaudible.
When playing back tapes recorded on
other decks, meter deflections are
greater (smaller) than when recording.
Track Configuration .................... 4 track, 2 channel stereo
Motor ........................................... DC servo motor (capstan)
Head ........................................... Recording: hard permalloy
Rapid Transport ............................................ 95 sec. (C-60)
Wow and Flutter
W.RMS .................................................... less than 0.05%
W.Peak .................................................. less than ±0.08%
Signal-to-Noise Ratio
(Dolby NR off) ...................................... better than 60 dB
(Dolby B NR on) .................................. better than 68 dB
(Dolby C NR on) .................................. better than 76 dB
Frequency Response
Normal tape (–20 dB) ................... 20 - 17,000 Hz ±3 dB
High (CrO
tape (–20 dB) ............ 20 - 18,000 Hz ±3 dB
2)
Metal tape (–20 dB) ...................... 20 - 20,000 Hz ±3 dB
Harmonic Distortion
Normal tape ............................................. less than 0.8%
High (CrO
) tape ...................................... less than 0.8%
2
Metal tape ................................................. less than 0.8%
Input Sensitivity/Impedance
Line .................................................... 100 mV/50 k-ohms
Output Level
Line ................................................... 570 mV/2.2 k-ohms
Channel Separation (1 kHz) ...................................... 40 dB
Cross Talk (125 Hz) ................................................... 55 dB
Cause
¶ A tape recorded without Dolby NR is
played back with Dolby NR on.
¶ Heads are dirty.
¶ Heads are magnetized.
¶ Basic levels are different for different
cassette decks.
SPECIFICATIONS
DC motor (reel)
DC motor (tray)
Playback: hard permalloy
Erase: double-gap Ferrite
¶ Playback in OFF position.
¶ Clean heads and carry out
demagnetization with head
demagnetizer.
¶ This is not a fault.
GENERAL
Power Supplies
Europe model ............................................. 230 V, 50 Hz
U.K. model and Australia model .............. 240 V, 50 Hz
General model ................. 110/120/220/240 V, 50/60 Hz
Power Consumption ................................................... 16 W
Dimensions (W x H x D) ..................... 280 x 119 x 360 mm
Weight .................................................. 4.8 kg (10 lbs. 9 oz.)
Accessories
Connecting cords ......................................................... 2
* Specifications subject to change without notice.
Cure
5 W(POWER OFF)
(11 x 4-11/16" x 14-3/16")
15
Need help?
Do you have a question about the KX-10 and is the answer not in the manual?
Questions and answers