Maintenance And Cleaning; Troubleshooting - ALDI WORKZONE HCE1400 User Manual

HCE1400
X. Maintenance and cleaning
Pull out the power plug before every maintenance operation. This also includes
connecting to the water supply or trying to eliminate leaks. There is a risk of electro-
cution or of injury from moving parts.
Cleaning
It is recommended to clean the high pressure cleaner after each use.
Never direct the water jet against the high pressure cleaner, nor clean the
high pressure cleaner under flowing water. This could give rise to the danger
of electric shock and damage the high pressure cleaner!
Always keep the high pressure cleaner clean. Do not use any detergents or sol-
vents.
• Always keep the ventilation slots clean and free from dirt and dust.
• Only clean the high pressure cleaner with a soft brush or a slightly moist cloth.
• If the vario nozzle (10) is soiled or blocked, you can remove any foreign bodies in
the nozzle using the nozzle cleaning needle (15).
Maintenance
The high pressure cleaner is maintenance free.
XI. Troubleshooting
Problem Possible Cause
No electrical voltage at the high pres-
sure cleaner.
The high
The cross section of the extension
pressure
cable is not large enough and/or the
cleaner
extension cable is too long.
does not
work.
The mains voltage is lower than that
specified.
The high pressure cleaner is frozen.
The motor Air intake in the water inlet.
starts but
there is no
pressure
Insufficient water supply
build-up.
The Air intake in the water inlet.
operating
pressure is
irregular.
AFTER SALES SUPPORT
1300 855 831

Maintenance and cleaning/Troubleshooting
MODEL: HCE1400 PRODUCT CODE: 58428 11/2018
Action
Check the fuse, power cable and
power plug and have them replaced
by qualified personnel if necessary.
Use extension cables with larger
cross sections and/or use shorter
extension cables.
Contact the power supply company
if necessary.
Check and thaw if necessary.
Check the supply hose and hose
connectors and replace if neces-
sary.
Turn the water supply to full flow
Check the supply hose and hose
connectors and replace if neces-
sary.
 support@scheppach.com.au
AUS
23