Silvercrest SHE 3 B2 Operating Instructions Manual page 47

1) Remove the protective cap
2) Select the desired pumice attachment
coarse pumice attachment
–
for particularly thick calluses
fine pumice attachment
–
for mild calluses and to smooth the skin.
3) Fit the pumice attachment
in the section "Operation".
4) Press the integrated safety button in the On/Off
switch
switch
starts to turn.
5) Applying light pressure, move the appliance
slowly over the hard skin that you want to remove.
Move the appliance in different directions. Dur-
ing the treatment, do not linger in one particular
place. The friction can cause unpleasant heat.
6) When you have finished the treatment, push the
On/Off switch
7) Remove any skin residue and dust from the pumice
attachment
the supplied cleaning brush
8) Replace the protective cap
NOTE
► After the treatment, massage the skin with a
skincare cream.
│ GB │ MT
■ 44
and, at the same time, push the On/Off
upwards. The pumice attachment
downwards.
/ and the hand element using
from the appliance.
/ :
(grey):
(red):
/ as described
.
.
SHE 3 B2
/