Disabling Callhome Or Connecthome And Email Notifications - Dell EMC NX4 Series Manual

Disabling CallHome or ConnectHome and Email notifications

Open a HyperTerminal session with the Celerra system and then use procedure in the section
that follows for your EMCNAS version to disable CallHome or ConnectHome and Email
notification.
Opening a HyperTerminal session with the system
1. At the rear of the cabinet, connect the null modem cable (P/N 038-003-458) from the serial
port on the service laptop to the primary Control Station
Figure 1. Control station serial connection
2. Open the HyperTerminal session using the following settings:
Bits per second:
Data bits:
Parity:
Stop bits:
Flow control:
Emulation:
Telnet terminal ID:
Note: If you cannot connect to the HyperTerminal session, reboot the Control Station, log in, and
repeat this step.
3. Login as
nasadmin
:
login
nasadmin
4. Become the root user:
$ su root
Password:
Disabling CallHome or ConnectHome and Email notifications
19200
8
None
1
None
Auto Detect
ANSI
:
Disabling CallHome or ConnectHome and Email notifications
(Figure 1 on page 5).
Serial port
5