Verifying The Operation Of A New Or Replacement Part - Dell EMC NX4 Series Manual

Verifying the operation of a new or replacement part

Use Navisphere Express
replacement part.
If the storage system is running Navisphere Express, use Navisphere Express to verify the
operation of a new or replacement part.
If the storage system is running Navisphere Manager, use Navisphere Manager to verify
the operation of a new or replacement part.
Note: All AX4-5 series storage systems ship with Navisphere Express installed. To use Navisphere
Manager, you need to upgrade your storage system to Navisphere Manager.
Verify the operation of a new or replacement part using Navisphere
Express
1. In a browser on a network-connected host, start Navisphere
system by entering the IP address of an SP in the storage system.
2. In the
Navisphere Express
3. Scan the list of components to verify that all components are recognized and working
properly.
If fault lights on storage system are still lit, go to the
http://Powerlink.EMC.com
Verifying the operation of a new or replacement part using Navisphere
Manager
1. Start Navisphere
window.
2. In the
Navisphere Manager Storage
you installed or replaced the part, expand the storage-system icon, and select the
icon.
3. Expand the enclosure in which you installed or replaced the part, and navigate to the
part.
4. Verify that the part is in the enclosure and that it is not faulted.
® ®
or Navisphere
navigation pane, under
website for more information.
®
Manager for the storage system by entering the IP address in a browser
tree, locate the icon for the storage system in which
Verifying the operation of a new or replacement part
Verifying the operation of a new or replacement part
Manager to verify the operation of a new or
®
, click
View
Celerra Tools
Express for the storage
.
Components
page on the
Physical
15