Huawei PDU8000 Quick Installation Manual page 9

Removing a rodent-proof mesh
3. (Optional) Trim the removed rodent-proof
meshes to an appropriate size, and reinstall
them in the PDC.
(Optional) Connecting Cables for
the UPS Input and Output PDC
1. Connect the PE cable.
NOTE
Secure one end of the ground cable to the ground
bar inside the PDC, and secure the other end to the
ground grid or busbar of the equipment room.
3. Connect the UPS input power cables.
Cutting a cross in a wire bushing
2. Connect the mains input power cables.
8