Huawei PDU8000 Quick Installation Manual page 3

Flat-head screwdriver
Multimeter
Pallet truck
Insulation tape
Heat gun
NOTE
This table may not list some tools required at specific sites. Onsite installation personnel and

technical support personnel should prepare tools based on site requirements.
Prepare firestop putty for sealing cable holes after cable connection. Huawei does not provide

the firestop putty. The customer needs to purchase it.
3
Acceptance Guide
Unpacking and Acceptance
3.1
NOTE
After the equipment is delivered to the installation site, representatives from the customer and

Huawei unpack and inspect the equipment together.
If any damage is found, report it to the carrier immediately.

Phillips screwdriver
Phase sequence
meter
Firestop putty
Protective shoes
Hammer drill
2
Rubber mallet
Measuring tape
Cable cutter
Level
Cable tie
Electrician's knife
Step ladder (2 m)
Insulated gloves
Protective gloves