Changing The Password - Vertiv Liebert ITA2 Installer/User Manual

Table 3.5 Settings Available at the Display Panel (continued)
Tab Settings
Turn outlet ON
Turn outlet OFF
Reboot outlet
Turn off when UPS overload on
Outlet
battery
Turn of when UPS on battery for
Turn off when backup time less
than
Turn off when battery capacity
less than
Turn on when power returns for

3.4.1 Changing the Password

The default password is 111111 (six ones). You must use the current password to change the password.
NOTE: We recommend that you change the password from the default to protect your system and
equipment. Record the new password and store it in an accessible location for later retrieval.
1. At the main menu, select the Settings icon, and press Enter.
2. At the password prompt, use the up-arrow to select the first digit, press the down-arrow to
move to the next digit, repeat for each digit, then press Enter to access the settings.
3. Use the arrow buttons to select the Monitor tab, then press Enter.
3 Operation and Display Panel
Parameter range
-
-
-
Yes, No
0-4320 minutes
0-4320 minutes
20-80%
0-4320 minutes
Default setting
Appears only when outlet
is off
Appears only when outlet
is on
Appears only when outlet
is on
No
2
0
30%
0
51