Changing The Password - Vertiv Liebert EDGE Series Installer/User Manual

PROMPT
Start battery manual test?
Stop battery manual test?
Clear faults?
Reset power statistics?
New alarm present
New Fault present

3.3.1. Changing the Password

The default password is 111111 (six ones). You must use the current password to change the password.
1. At the main menu, select the Settings icon, and press Enter.
2. At the password prompt, use the up-arrow to select the first digit, press the down-arrow to move to the next
digit, repeat for each digit, then press Enter to access the settings.
3. Use the arrow buttons to select the Monitor tab, then press Enter.
4. Use the down arrow to highlight Change Settings Password, press Enter, and re-enter the current password.
The Input new password dialog opens, see below.
5. Enter the new password, then confirm the new password. A confirmation dialog opens to indicate a
successful password change.
6. Press ESC to return to the settings or main menu.
Figure 3-2 New and Confirm Password dialogs
34
MEANING
Appears when execute the command of 'Start battery manual test' on the LCD panel
'Control' page.
Appears when execute the command of 'Stop battery manual test' on the LCD panel
'Control' page.
Appears when execute the command of 'Clear faults' on the LCD panel 'Control' page.
Appears when execute the command of 'Reset power statistics' on the LCD panel
'Control' page.
Appears when new alarm occurs.
Appears when new fault occurs.
Operations