Safety Instructions; About This Chapter; Intended Use - Bosch REXROTH A4 Series Instruction Manual

10/104

Safety instructions

Bosch Rexroth AG, A4... with HS5E pilot control valve/Series 3x, RE 92076-01-B/10.2017
2 Safety instructions

2.1 About this chapter

The HS5E control system has been manufactured according to the generally
accepted rules of current technology. There is, however, still a danger of personal
injury or property damage if this chapter and the safety instructions in this
documentation are not complied with.
▶ Read this documentation completely and thoroughly before working with the
HS5E control system.
▶ Keep this documentation in a location where it is accessible to all users at all
times.
▶ Always include the required documentation when you pass the axial piston unit
on to third parties.

2.2 Intended use

The HS5E control system is a hydraulic component, which means that in its field of
application, it is classified neither as complete nor as partly complete machinery
in the sense of EC Machinery Directive 2006/42/EC. The component is exclusively
intended to form partly completed machinery or complete machinery together with
other components. The component may only be commissioned after it has been
installed in the machine/system for which it is intended and the safety of the entire
system has been established in accordance with the Machinery Directive.
This product is intended for the following use:
The pressure flow control system is for control of the electrohydraulic pressure and
swivel angle of an axial piston variable pump.
Observe the technical data, operating conditions and performance limits as specified
in the data sheet and order confirmation.
The HS5E control system is a piece of technical work equipment and it is not
intended for personal use.
Intended use includes having read and understood this documentation completely,
especially chapter 2 "Safety instructions" on page 10.
Operation is only allowed if you comply with national EMC regulations for the
present application. If you need information about EMC-compliant installation, refer
to Bosch Rexroth's EMC test documentation (see chapter "Electrical connection of
the pilot valve" on page 96). Ensuring compliance with the limit values required
by national regulations is the responsibility of the manufacturer of the system or
machine.
• European countries: EU Directive 2014/30/EU (EMC Directive)
• USA: See the National Electrical Code (NEC), national organization
of the manufacturers of electrical systems (NEMA) as well as regional building
regulations.
▶ Comply with the technical data, the application and operating conditions,
and the performance limits as specified in data sheet 92076 and in the order
confirmation. Information about approved hydraulic fluids can be found in data
sheet 92076.