Connections; Usb Port Connection; Installing The Printer Driver - Sony UP-DR80MD Instructions For Use Manual

Connections

After connecting a USB connecting cable (supplied) to the
printer and the computer, connect the power cord. For
details about the printer connection, refer to the manuals
for the computer or other peripheral devices.

USB Port Connection

to ~AC IN connector
Power cord
to wall outlet
Computer
WARNING
Using this unit for medical purposes
This equipment's connectors are not isolated.
Do not connect any device other than one which conforms
to IEC 60601-1.
When an information technology device or AV device that
uses an alternating current is connected, current leakage
may result in an electric shock to the patient or operator.
If use of such a device is unavoidable, isolate its power
supply by connecting an isolation transformer, or by
connecting an isolator between the connecting cables.
After implementing these measures, confirm that the
reduced risk now conforms to IEC 60601-1.
14
Connections
UP-DR80MD
to (USB)
connector
USB connecting
cable (supplied)
Securing the USB cable
After you connect the USB cable to the printer, it is
recommended that you use the cable stopper to secure the
USB cable to prevent it from being accidentally
disconnected.
Notes
• Follow the connection procedures described in the
computer manual.
• Make sure that the USB cable is connected securely at
both ends.
• The printer driver software provided with the printer is
not suitable for using the printer connected to a network.
• Operation of the printer is not guaranteed for connection
to a USB hub.

Installing the Printer Driver

After connecting the printer to your computer, turn on the
printer. For details on installation, refer to the install guide
and ReadMe file included on the supplied CD-ROM.