Table of Contents
Advertisement
Care and Maintenance
Care and Maintenance Instructions
To keep your robot running at peak performance, perform the
EN
procedures on the following pages.
There are additional instructional videos in the iRobot HOME App. If you
notice the robot picking up less debris from your floor, empty the bin,
clean the filter, and clean the brushes.
Part
Care Frequency
Bin
Wash bin as needed
Filter
Clean once a week (twice
a week if you have a pet).
Do not wash.
Full Bin Sensor
Clean every 2 weeks
Front Caster
Clean every 2 weeks
Wheel
Edge-Sweeping
Clean once a month (twice
Brush and Multi-
a month if you have a pet)
Surface Brushes
Sensors and
Clean once a month
Charging
Contacts
Note:
iRobot manufactures various replacement parts and assemblies. If
you think you need a replacement part, please contact iRobot Customer
Care for more information.
* Replacement frequency may vary. Parts should be replaced if visible wear
appears.
5
For more information, visit global.irobot.com
Emptying the Bin
1
Replacement
Frequency*
2
Every 2 months
Every 12 months
Every 12 months
3
Press bin release
button to remove bin.
Open bin door to empty bin.
Place bin back in the robot.
Cleaning the Filter
1
Remove the bin. Remove the
filter by grasping both ends
and pulling out.
2
Remove debris by tapping
the filter against your trash
container.
3
Reinsert filter with ridged
grips facing out. Place bin
back in the robot.
Important:
The robot will not run if
the filter is not installed correctly.
Replace the filter every two months.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba i7 and is the answer not in the manual?
Questions and answers
How do I re-Map the I7 roomba?
To re-map the iRobot Roomba i7, follow these steps:
1. Open the iRobot app and ensure your Roomba is paired.
2. Click on the map section in the app.
3. Select the option to create a new smart map.
4. Follow the mapping tips:
- Ensure the room has enough light.
- Open blinds, doors, and remove obstacles for better navigation.
5. Click "Next" and start a mapping run.
6. The Roomba will explore the space without cleaning to create a new map.
7. Ensure the battery is sufficiently charged for the mapping process to begin.
This process allows the Roomba to learn and update the map of your home.
This answer is automatically generated
WHERE DO I FIND ZONES
The iRobot Roomba i7 allows users to create "Keep Out Zones" but does not have an option to add "Cleaning Zones." Smart Mapping technology is used to define areas, and the robot may require multiple mapping runs to update new areas.
This answer is automatically generated
Why did the edge brush stop turning. i6