Configure Network Access; Install The Alibi Config Tool Software - ALIBI ALI-NS7004R Installation Manual

SECTION 3

Configure Network Access

3.1 Install the Alibi Config Tool software

NOTE: If the camera LAN extension cable is attached to a Network Video Recorder (NVR), skip this step.
The Alibi Config Tool is a PC-based network utility for discovery of Alibi compatible devices. It provides an easy way to activate
devices, configure camera and recorder network configuration settings, and set device passwords. It can be installed on a
Microsoft® Windows® operating system that has direct access to the network where your Alibi devices are installed. You can
download the Alibi Configuration Tool from Supercircuits.com or AlibiSecurity.com/Resources.
1. Download the Alibi Config Tool from the Supercircuits.com or AlibiSecurity.com/Resources website. At the time when
this document was published, the file is named: alibi-config-tool.zip and is about 80MB.
2. Un-zip the file on a computer with Microsoft Windows (Windows 7 or newer) that is connected to the LAN where your Alibi
camera is connected.
3. Run the file contained in the zip file: Alibi Config Tool.exe. Follow the on-screen instructions to install the file.
4. Open the Alibi Config Tool application. When the application opens, it automatically "discovers" and lists all Alibi compatible
devices on the LAN. See below.
Note: In the screen above, the tool can discover devices on other subnets. It will also list other Alibi compatible devices on the
LAN, and devices with the address 192.168.1.64 (an inactive Alibi device).
SECTION 3: CONFIGURE NETWORK ACCESS
ALI-NS7004R IP PTZ Camera Installation Guide 17