Design Within Reach Cove Bed 100083918 Manual

Cove Bed

Customer Service:

1.800.944.2233 inside the U.S.

1.203.614.0600 outside the U.S.

1 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S

Wood Care

Dust with a slightly damp, soft,

lint-free cloth. Wipe dry with a

dry, soft cloth in the direction of

the wood grain. Do not use aerosol

cleaners or polishes. Also, do not

use polishes containing waxes

or abrasives, or polishes that are

oil-based.

Table of Contents

Do you have a question about the Cove Bed 100083918 and is the answer not in the manual?

Page 1 Cove Bed Designed by Nathan Yong Wood Care Dust with a slightly damp, soft, lint-free cloth. Wipe dry with a dry, soft cloth in the direction of the wood grain. Do not use aerosol cleaners or polishes. Also, do not use polishes containing waxes Customer Service: or abrasives, or polishes that are...
Page 2 Cove Bed Hardware Checklist 40 X SHORT BOLTS FOR TWIN 80 X SHORT BOLTS FOR FULL 2 X LONG BOLT 84 X SHORT BOLTS FOR QUEEN OR KING 8 X MACHINE SCREWS 2 X L-BRACKET MALLET BLOCK ALLEN WRENCH MALLET (REQUIRED TOOL) ELECTRIC DRILL (OPTIONAL TOOL) 2 | W W W.
Page 3 Cove Bed Attach side rails to headboard and footboard by connecting hooked brackets into corresponding slots on bedposts as shown. Place mallet block over side rail near bedpost, then hit with mallet to firmly lock side rail into place. Repeat with other three corners. MALLET 3 | W W W.
Page 4 Cove Bed Attach legs to center rail with long bolts as shown, if applicable. Please Note Twin bed does not have center-rail legs. Attach L-brackets to headboard and footboard with machine screws, then rest center rail on brackets and secure with machine screws. LONG BOLTS MACHINE SCREWS ALLEN WRENCH...
Page 5 Cove Bed Install slats and secure with short bolts and Allen wrench or drill. SHORT BOLTS ALLEN WRENCH ELECTRIC DRILL 5 | W W W. D W R . C O M | 1. 8 0 0 . 9 4 4 . 2 2 3 3 | D E S I G N W I T H I N R E A C H S T U D I O S...