Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Design Within Reach GATHER TABLE 100062673
Summary of Contents for Design Within Reach GATHER TABLE 100062673
- Page 1 The GATHER TABLE Designed by Jacob Plejdrup ASSEMBLY INSTRUCTION...
-
Page 2: Assembly Instruction
ASSEMBLY INSTRUCTION Due to the size and weight of the components the assembly requires two people. Tools needed Rubber mallet Large, clean, protective material such as a blanket or tarp. PARTS LIST 24 x Short screw, Torx 30 head 8 x Long screw, Torx 30 head 12 x Short wooden dowel 8 x Long wooden dowel 5 x Metal pin... - Page 3 Lay tabletop halves on protective material with undersides facing up. Insert five metal pins in one table half, then slide other half onto pins. Insert four short wooden dowels into predrilled holes on underside of tabletop.
- Page 4 Insert long wooden dowels into predrilled holes in leg, then fit leg bar onto dowels and tap in with rubber mallet. Insert long screws in predrilled holes in center of leg bar and tighten with Torx wrench or screwdriver. Repeat with second leg assembly.
- Page 5 Insert short wooden dowels in ends of cross beams and tap in with rubber mallet. Attach cross beams to first leg assembly and tighten connector cams with Allen wrench. Repeat process with second leg assembly to complete table base.
- Page 6 Lift table base onto table top and fit onto dowels installed in previous step. Attach base to tabletop with 24 short screws using Torx wrench or screwdriver. Use a piece of thick paper or cardboard as protection material to avoid damages of the legs. Retighten the connector cams when fully assembled.
- Page 7 Leveling glides may be adjusted after table is turned over and put in place. Optional felt pads may be attached...
-
Page 8: Care And Cleaning Instructions
CARE AND CLEANING INSTRUCTIONS General care • Avoid exposing to direct heat and sunlight which can cause cracking and color changes (some woods can darken and some can fade). • Color changes may also occur when objects are left for extended periods on the same spot on the furniture. • Maintain consistent humidity of 45 – 55% in your home to prevent excessive expansion and contraction of parts and joints. • Wipe up spills immediately with a clean, dry cloth. • Do not place hot or humid objects directly on the furniture, which may stain or damage it. • Use trivets for hot pans or dishes to prevent damage to finish and underlying wood. • Use coasters for drinks to prevent moisture from contacting surface. • Keep rough and sharp objects away from wood surfaces. • Apply protective pads to undersides of items being displayed on wood surfaces. • Avoid prolonged contact of rubber feet or bumpers on displayed items, which can react with and damage wood finish. Cleaning • Dust frequently with a damp cloth, then wipe dry. • Clean as necessary with a cloth moistened with a solution of mild soap and water. Wipe dry immediately. • Never pour soap or water directly onto the furniture surface. • Do not use harsh chemicals or abrasives on any finishes.
Need help?
Do you have a question about the GATHER TABLE 100062673 and is the answer not in the manual?
Questions and answers