Optional lens for lcd projector pt-ex16k series (20 pages)
Summary of Contents for Panasonic ET-LAEF100
Page 1
ET-LAEF100 Model No. ENGLISH Thank you for purchasing this Panasonic product. ¢ Please read these operating instructions and the projector operating instructions carefully, and then use this product correctly. ¢ Before using this product, be sure to read “Read this first!” ( x Page 2).
Read this first! Always follow these precautions WARNING: Before replacing the lamp unit, be sure to turn the power off and to dis- connect the power plug from the wall outlet. Electric shocks or explosions can result if this is not done. Do not disassemble the lamp unit.
Replacing the lamp unit Be sure to turn off the power before replacing the lamp unit. When switching off the projector, make sure to follow the procedures in “Switching off the projector” ( x page 3). It is recommended that you request a qualified technician to replace the lamp unit. Consult your dealer.
Page 4
Replacing the lamp unit (continued) Press the <OFF> side of the <MAIN POWER> switch to turn off the power. Replacing the lamp unit Attention When the projector is mounted on the ceiling, do not make the replacement while your face is near the lamp unit.
Page 5
Replacing the lamp unit (continued) Note When you replace the lamp unit with new one, the projector resets the total usage time of the lamp unit automatically. Attention After unpacking the lamp unit, discard the packaging material properly. ENGLISH - 5...
Page 6
Information for users in the European Union Importer’s name and address within the European Union Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 11, 22525 Hamburg, Germany Product information (for Turkey only) AEEE Yönetmeliğine Uygundur.