Service" Screenshot; Wrapping Screen With "Special Cycles - Robopac S6 Use And Maintenance Manual

A) Push-button: used to select the type of
user concerned.
At each activation, the push-button
displays the function enabled with the
reference icon.
‒ A1 Icon: used to select the "machine
responsible" user.
‒ A2 Icon: used to select the
"assistance service" user.
B) Area: displays the characters entered.
C) Numeric keypad.
D) Push-button: used to confirm the
password entered (login).
To prevent another type of user from
accessing the protected functions, at the
end of the operations use one of the
following procedures to perform the
"user logout".
‒ Touch the icon (A1) located on the tool
bar.
‒ Turn off and turn on the machine again.
E) Push-button: used to cancel the wrong
characters entered.

6.13. "SERVICE" SCREENSHOT

The screenshot is only reserved to the
Manufacturer's Support Service to
perform the diagnostics and the basic
programming.
A) Button: It is used to access the battery
charger screen.
B) Button: It is used to access the alarm log
screen.
C) Button: It is used to access the machine
general parameters screen.
D) Button: It is used to access the PLC
input/output screen.
E) Push-button: displays the status of the
modbus.
F) Push-button: displays the instantaneous
pull and drawing.
G) Push-button: accesses the screen for
updating the software.

6.14. WRAPPING SCREEN WITH "SPECIAL CYCLES"

This screen shows the controls that activate wrapping with "special cycles".
52/94
ROBOT S6