Charging Your Band - Huawei TalkBand B6 Online Help Manual

Hide thumbs Also See for TalkBand B6:

Table of Contents

HUAWEI TalkBand B6 Online Help

Powering off the band

●

Restarting the band

●

1.2 Charging your band

Press the side buttons on both side of the band to take out the earphone and plug

the charger to the earphone. The band will display the charging animation when it

is being charged.

Charging time: Around 65 minutes for a full charge.

Viewing battery level: Swipe down on the band's home screen or open the

Huawei Health app, then touch Devices and the connected phone.

Low battery alert: The band will vibrate to remind you when the battery level on

the band is lower than 20%, 10%, and 5%.

Issue 01 (2020-07-31)

NO TE

You will be prompted with a message asking you to charge your band when the

battery is extremely low. The band will power off automatically after 2 seconds and

you won't be able to power it on again.

Press and hold the side button for 3 seconds, then select Power off to power

off your band.

On the band, go to Settings > System > Power off to power off your band.

NO TE

Your band will automatically power off if it has run out of the battery.

On the band, go to Settings > System > Restart to restart the band.

Press and hold the side button for 3 seconds, then select Restart.

NO TE

● Before charging, wipe off any water or sweat on the band, and make sure the band

charging port is clean and dry to prevent short circuits.

● Use a Huawei charger with a rated output voltage of 5 V and a rated output current of

1 A or above or a computer to charge your band. If you use a non-Huawei charger, the

charging may be slow and your band may heat up. Exercise caution when using a non-

Huawei charger.

1 Getting Started

Table of Contents