Pre-Wash Cycle; Cleaning The Lint Filter - Whirlpool Thin Twin LT5004XS Use & Care Manual

Pre-wash cycle
3. Turn clockwise to point to the
number next to PRE-WASH.
4. Pull the Cycle Control Knob out. The
washer will stat-t.
5. When the cycle is over, add
detergent for the next selected wash
cycle. The PRE-WASH Cycle should
always be followed by a wash cycle.
NOTE: See the Laundry Guide for
additional pre-washing information.
Cleaning the lint filter
Clean the filter after every load for the
best filtering results.
NOTE: The load type will vary the
amount of lint build-up.
To clean:
1. Lift off the agitator barrel.
2. Wash or wipe the filter clean in the
bottom of the agitator barrel. The
filter is not removable.
3. Replace the agitator barrel and snap
it into place.
12