Consideration of Windows Installation
CHAPTER 4
Installation
This section describes how to install Windows in the FC SAN boot environment.
4.1
Windows Server OS install
Refer to OS installation manual for the installation of Windows Server OS.
4.1.1 Preparing for Windows Server OS installation
Make settings for installation in advance.
For details on this advance setup, see 4.4.1 Advance setup in the PRIMEQUEST 2000 Series Installation Manual (C92344-
0536).
For a multipath configuration, disconnect the secondary cable connected to the server.
Specifically, use a single path configuration (connection with only one FC cable) until you complete the installation of the operating
system and multipath driver.
If the server is in a multipath connection state, the operating system cannot be installed correctly. Manually disconnect the
secondary FC path beforehand (more specifically, disconnect the secondary cable of each server).
C122-E206-04EN
Consideration of Windows
98