Various Post-Installation Settings - Fujitsu PRIMEQUEST 2000 Series Manual

Consideration of Windows Installation

4.1.3 Various post-installation settings

Make various settings by referring to CHAPTER 5 Work after Operating System Installation (PRIMEQUEST 2000) or CHAPTER
6 Work after Operating System Installation (PRIMEQUEST 2000) in the PRIMEQUEST 2000 Series Installation Manual
(C92344-0536).
4.1.4 Install OCManager
1. Install OCManager.
2. The installation of OCManager can be confirmed by the existence of [Emulex] - [OCManager], which is displayed by
selecting [Programs] from the [Start] menu.
3. Refer to install procedure of OEM Driver Installation about how to install OCManager
Remarks
At this time, leave the secondary FC path cable disconnected.
4.1.5 Install multi-path driver
The multi-pass driver that uses it is installed.
Refer to the manual of the multi-pass driver that uses it for the installation procedure.
4.1.6 Restore the multi-pats connection
Restore the multipath connection.
OS is shutdown, the cable of the FC passing cut according to procedure 1 is reconnected after the power supply of
the partition is cut, and OS is started. After it shuts down after the start by the multi-pass is confirmed, internal HDD
into is added when internal HDD into is used.
Then, proceed to 4.2 Changing and Checking the Setting of Detailed FC Card Information.
C122-E206-04EN
100