Step Five: How Can I Review The Photos And Videos; Review The Files Directly On The Camera; Review The Files On The Computer/Phone - Victure HC200 Manual

After it stops blinking, the PIR sensor is active, and any motion that is detected by it will trigger
the capture of the photos or videos as programmed in the【MENU】.
Please note, the PIR sensor is strongly sensitive to ambient temperature. The greater the
temperature difference between the environment and your subject, the farther the possible
sensing distance.

STEP FIVE: HOW CAN I REVIEW THE PHOTOS AND VIDEOS?

All photos and videos taken by the camera can be viewed directly on the built-in screen, also can
be deleted directly on the camera. However, if the file is too large, it cannot be viewed on the
camera but can be viewed on the computer.
>Review the Files Directly on the Camera
Slide the switch button to 【TEST】 position, press the REPLAY button to enter the Replay interface.
Press the Replay button again you could quit the Replay interface.
In Replay mode, you could:
· press the UP button: page forward;
· press the DOWN button: page backward;
· press the MENU botton: delete the current file.
If you are reviewing the videos, you could also:
· press【OK】button: play/pause the video;
· press【MENU】button: stop playing the video;
>Review the Files on the Computer/Phone
The most popular way to review the images on your SD card is to review the images on your
computer/phone with card reader. The pictures can be viewed on both PC and the Mac
computers.
* Victure 4 in 1 Card Reader: www.amazon.com/dp/B082HF9L4J
10