Your ViP 1003 Package Placement Enclosed material Do not cover The following material should be present in your package. Do not place anything on top of the set-top box, instead leave a free space of 20 cm above it for proper ventilation and cooling.
Page 4
ViP1003 oVerView installing Front panel of models without display Connecting to broadband Connect one end of the Ethernet cable to the connector marked ETHERNET on the rear panel of the set-top box and the other end to a hub or the Ethernet wall connector provided by your broadband operator. Connecting to the TV set Connect one end of the enclosed SCART cable to the SCART connector marked TV on the set-top box and the other end to your TV set.
Page 5
installing installing Optional: Optional: Connecting High definition Video Connecting to external audio If your TV set is HDTV compatible, you can connect the set-top box to If you want to use an external source to play audio such as a stereo or the TV set using the HDMI connector instead of the SCART connector to home cinema equipment.
The Motorola website opensource.motorola.com source code being made publicly available by also contains information regarding Motorola’s use Motorola related to software used in this Motorola of open source. set-top box you may send your request in writing Motorola has created the opensource.motorola.com...
When your set-top box is up and running, please see the instructions provided by your IPTV provider on how to reach the services and how to access the User’s Guide. Motorola, Inc. Teknikringen 20 SE 583 30 Linköping, Sweden http://www.motorola.com...
Need help?
Do you have a question about the VIP 1003 and is the answer not in the manual?
Questions and answers