Do you have a question about the SET-TOP BOX VIP1200 and is the answer not in the manual?
Questions and answers
Elmer Roettger
January 24, 2025
Why is my VIP1200 sending an analog signal to my Bravia tv? The tv is 3 months old and is connected to the receiver with an HDMI cable?
1 comments:
Mr. Anderson
February 10, 2025
The Motorola VIP1200 set-top box should send a digital signal when connected via HDMI. If your Bravia TV is receiving an analog signal, check the following:
1. HDMI Connection: Ensure you are using a proper HDMI cable and that it is securely connected to both the VIP1200 and the TV. 2. HDMI-to-DVI Converter: If you are using an HDMI-to-DVI converter, note that DVI does not carry audio, and an additional audio connection is required. 3. TV Input Settings: Verify that the TV is set to the correct HDMI input. 4. Set-Top Box Settings: Check the VIP1200’s video output settings to confirm that it is set to output a digital signal. 5. Cable and Port Issues: Try a different HDMI cable or port on the TV to rule out hardware issues.
If the issue persists, consider resetting the set-top box and TV or checking for any compatibility issues between the two devices.
Graphical symbols and supplemental warning markings are located on the back and bottom of the terminal. WARNING TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of...
Page 4
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Unplug this apparatus during lightning storms or when unused for long periods of time.
According to 47 CFR, Parts 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers, Motorola, Inc., 6450 Sequence Drive, San Diego, CA 92121, 1-800-225-9446, declares under sole responsibility that the product identifies with 47 CFR Part 2 and 15 of the FCC Rules as a Class B digital device.
TERMS OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY-BINDING AGREEMENT BETWEEN YOU AND MOTOROLA. THE TERMS OF THIS LICENSE APPLY TO YOU AND TO ANY SUBSEQUENT USER OF THIS SOFTWARE. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS LICENSE (I) DO NOT USE THE SOFTWARE AND (II) RETURN THE RECEIVER AND THE SOFTWARE (COLLECTIVELY, “PRODUCT”), INCLUDING ALL...
Page 7
License. The Software, including any images, graphics, photographs, animation, video, audio, music, and text incorporated therein is owned by Motorola or its third party licensors and is protected by United States copyright laws and international treaty provisions.
CONTENTS 1 Introduction...1 Your Set-top Boxes ...1 Front Panel...2 Rear Panel...3 Video Connection Options ...4 Audio Connection Options...5 2 Connecting Your Set-top Box ...7 Connecting to an HDTV — Video Only ...8 Connecting to an HDTV — Audio Only...9 Connecting to a Home Theater Receiver — Audio Only ...10 Connecting to a Stereo TV...11 Connecting to a Stereo TV and Stereo VCR ...12 Connecting to a Home Theater Receiver, TV, and VCR...13...
It also enables you to pause and rewind live programming. DVR functionality may be limited on some channels. Other TVs in your home may be connected to another DVR or standard high-definition set-top box, or both. Set-top boxes with hard drives are physically larger than those...
1 INTRODUCTION Front Panel Set-top boxes with hard drives and those without hard drives have identical front-panel controls and lights; only the size varies. Item Function POWER If held for less than five seconds, turns the set-top box on or off If held for five seconds or longer, restarts the set-top box Lights green when the set-top box is on USB 2.0 connector...
1 INTRODUCTION Rear Panel Set-top boxes with hard drives and those without hard drives have identical rear-panel connectors; only the size varies. TO WALL HDMI NETWORK (VIDEO IN) Item Function TO WALL Coaxial input for home video network (HPNA) (VIDEO IN) HDMI Connects to a high-definition TV or home theater receiver with an HDMI input (for a DVI input, use an...
1 INTRODUCTION Video Connection Options The set-top boxes offer the following video outputs: HDTV HDMI or Y Pb Pr (component video) Standard TV S-Video, RCA-type, or RF coaxial To determine the available inputs on your TV, check the manual supplied with the TV or on the TV itself. When you are familiar with the available inputs on your TV, choose the optimal video connection based on the following guidelines.
1 INTRODUCTION If you are connecting to a standard TV, use one of: Best S-Video Very RCA-type Good Good RF coaxial Audio Connection Options To connect your TV or home theater receiver for audio, depending on its capabilities, you can use one of the following audio outputs: Best OPTICAL Good...
2 CONNECTING YOUR SET-TOP BOX The following pages contain configuration diagrams designed to help you connect your set-top box. Identify the diagram that most closely matches your set up. After making the indicated connections, you will soon be enjoying the latest in home entertainment with IPTV.
2 CONNECTING YOUR SET-TOP BOX Connecting to an HDTV — Video Only Y Pb Pr HDMI TO WALL HDMI NETWORK (VIDEO IN) Video in Sample HDTV HDMI CABLE/ ANTENNA IN To determine your best connection, refer to “Video Connection Options. ” If you are connecting to a DVI or Y Pb Pr input on your TV, a separate audio connection is required.
2 CONNECTING YOUR SET-TOP BOX Connecting to an HDTV — Audio Only RCA-type audio Optical S/PDIF TO WALL HDMI NETWORK (VIDEO IN) Video in OPTICAL SPDIF Sample HDTV audio inputs To determine your best connection, refer to “Audio Connection Options. ” OPTICAL S VIDEO VIDEO OUT...
2 CONNECTING YOUR SET-TOP BOX Connecting to a Home Theater Receiver — Audio Only RCA-type audio Optical S/PDIF TO WALL HDMI NETWORK (VIDEO IN) Video in OPTICAL SPDIF Sample HDTV audio inputs To determine your best connection, refer to “Audio Connection Options.
2 CONNECTING YOUR SET-TOP BOX Connecting to a Stereo TV S-Video RCA-type video TO WALL HDMI NETWORK (VIDEO IN) Video in These connections serve the same purpose; use only one Sample stereo TV CABLE/ ANTENNA IN To determine your best connection, refer to “Video Connection Options.
2 CONNECTING YOUR SET-TOP BOX Connecting to a Stereo TV and Stereo VCR RCA-type video RCA-type audio TO WALL HDMI NETWORK (VIDEO IN) Video in Sample stereo VCR INPUT CABLE/ AUDIO VIDEO ANTENNA IN To TV To determine your best connection, refer to “Video Connection Options.
2 CONNECTING YOUR SET-TOP BOX Connecting to a Home Theater Receiver, TV, and RCA-type video RCA-type TO WALL HDMI (VIDEO IN) Video in Sample stereo VCR INPUT CABLE/ AUDIO VIDEO ANTENNA IN To TV To determine your best connection, refer to “Video Connection Options.
3 TROUBLESHOOTING Before calling Tech Support, review this troubleshooting guide. If the suggestions do not help you quickly solve a problem, contact your TV service provider for further assistance. Problem Possible Solutions The set-top Verify that the AC power cord is connected to the set-top box will not box and an AC outlet.
Page 26
3 TROUBLESHOOTING There is no Verify that the Mute button on the remote control has not audio when been pressed. Press Mute on the remote control to viewing TV restore sound. channels. Verify that the set-top box audio output is connected to the TV or home theater receiver.
Page 27
Motorola, Inc. 101 Tournament Drive Horsham, PA 19044 U.S.A. http://www.motorola.com 534977-001-c 12/06...
Need help?
Do you have a question about the SET-TOP BOX VIP1200 and is the answer not in the manual?
Questions and answers
Why is my VIP1200 sending an analog signal to my Bravia tv? The tv is 3 months old and is connected to the receiver with an HDMI cable?
The Motorola VIP1200 set-top box should send a digital signal when connected via HDMI. If your Bravia TV is receiving an analog signal, check the following:
1. HDMI Connection: Ensure you are using a proper HDMI cable and that it is securely connected to both the VIP1200 and the TV.
2. HDMI-to-DVI Converter: If you are using an HDMI-to-DVI converter, note that DVI does not carry audio, and an additional audio connection is required.
3. TV Input Settings: Verify that the TV is set to the correct HDMI input.
4. Set-Top Box Settings: Check the VIP1200’s video output settings to confirm that it is set to output a digital signal.
5. Cable and Port Issues: Try a different HDMI cable or port on the TV to rule out hardware issues.
If the issue persists, consider resetting the set-top box and TV or checking for any compatibility issues between the two devices.
This answer is automatically generated