Adjusting the temperature in
the MasterFresh zone (dry
compartment)
In Settings mode , use the and
sensor controls to select
and select OK to confirm your
Fresh
selection.
Use the and sensor controls to
select the desired temperature and
touch OK to confirm your selection.
Touch the sensor control if you
wish to terminate the process.
The segment bar displays 5 segments;
the temperature is adjusted in incre-
ments of approx. 34°F (1°C).
The factory default setting for the tem-
perature in the dry compartment is
32°F (0°C).
Selecting additional settings
Switching Eco Mode on or
off
Eco Mode
tion, for example, if you do not wish to
switch off the appliance completely or
Master-
do not need a high degree of cooling.
Energy consumption in
lower than in normal operation.
The refrigerator section is thereby regu-
lated to a temperature of 43°F (6°C) and
the dry compartment in the Master-
Fresh zone to approx. 34°F (1°C).
If the Automatic SuperCool function
is switched on, this will be automatically
switched off when
In Settings mode , use the and
sensor controls to select
and select OK to confirm your selec-
tion.
Use the and sensor controls to
switch
OK to confirm your selection.
Only the changed temperature on the
display indicates that
switched on.
Tip: You can also switch off the
Mode
temperature (see "The correct tem-
perature") – Setting the temperature").
Storing food at a temperature of 43°F
(6°C) for an extended period of time
may impair the shelf life and quality
of the food.
is useful when going on vaca-
Eco Mode
Eco Mode On
Eco Mode
function by directly adjusting the
is
Eco Mode
is selected.
Eco Mode
or
Off
and select
is
Eco
67