Pushing The Appliance Into The Niche - Miele K 2601 Vi Operating And Installation Instructions

Pushing the appliance into the niche

Then push the appliance into the
niche, taking care not to damage the
electrical connection!
If you are installing several refrigera-
tion appliances side by side, now se-
cure the appliances to one another
(see the installation instructions for the
side-by-side installation kit).
 To ensure that the refrigeration appli-
ance can then be aligned correctly,
the toe-kick ventilation grille must be
removed from the appliance toe-kick:
 Carefully guide a flat-head screw-
driver through the toe-kick ventilation
grille  on both sides and use it to
push the internal plastic latches out-
wards to release the toe-kick ventila-
tion grille.
 Place the toe-kick ventilation grille to
one side.
 Affix edge protection  to the adja-
cent cabinet fronts.
 Insert the plug connector at the back
of the refrigeration appliance (see "In-
stallation – Electrical connection").
 Insert the plug  into the electrical
socket.
The electrical socket must be close
to the refrigeration appliance and
easily accessible.

Risk of damage due to electrical
overload.
If the refrigeration appliance is elec-
trically overloaded, this can cause a
short circuit and thus damage your
refrigeration appliance.
When you install appliances side by
side, each refrigeration appliance
must have its own separate electrical
socket.
Tip: Secure the power cord to prevent it
from becoming caught by tying a piece
of string to the middle of the cord and
as the refrigeration appliance is being
pushed into the niche, pull the cord for-
ward underneath the appliance.
Installation
33