About Serial Port - Panasonic CF-P1 Series Supplementary Instructions Manual

About Serial Port

Establishing the Bluetooth Connection by Opening the COM Port
Use this setting when using Bluetooth intermittently (i.e. Printer application).
(1) Tap, in order,
Bluetooth].
(2) Tap (Refresh Button) on the command bar to search
for devices within range.
(3) Tap the target device from a device list.
(4) Tap (This icon indicates a serial port) from a ser-
vice list to connect the target device via the serial port.
(5) This message at right will be displayed.
Tap [ok] and tap
nect the Bluetooth connection.
(6) Start an appropriate software. (i.e. printer application)
(7) Set the COM port to COM9 (default).
(8) Open the COM port using the software.
The Bluetooth connection with the target device will
be automatically established.
NOTE
CF-P1 can be connected to the device by opening [Ac-
cess Serial Port] (
time without the need to set steps (1) to (5) again.
10
- [Programs] - [Panasonic
on the command bar to discon-
page 6) from the software from next