16: Usb Memory - Roland V-8HD Reference Manual

Menu List
Menu item
CTL A ASSIGN
CTL B ASSIGN
EXP ASSIGN
EXP CALIBRATE

16: USB MEMORY

Menu item
RESTORE ALL SETTINGS
BACKUP ALL SETTINGS
FORMAT
66
Value
(Bold: default)
INPUT SCAN NORMAL
INPUT SCAN REVERSE
MEMORY SCAN NORMAL
MEMORY SCAN REVERSE
Specifies the function that is assigned to the expression pedal.
* This is valid when "CTL/EXP TYPE" is set to "EXP. "
N/A
VIDEO FADER
H CUT I
VFX A MIX LEVEL
VFX B MIX LEVEL
OUTPUT FADE LEFT
OUTPUT FADE RIGHT
STILL 1–8 OUTPUT
INPUT 1–8 AUDIO LEVEL
AUDIO IN AUDIO LEVEL
AUDIO OUTPUT LEVEL
AUX OUTPUT LEVEL
ENTER
Value
(Bold: default)
ENTER
ENTER
EXEC
Explanation
Consecutively switches the input video in the order of INPUT 108 each time
you press.
Consecutively switches the input video in the order of INPUT 801 each time
you press.
Consecutively switches the preset memory in the order of 108 each time you
press.
Consecutively switches the preset memory in the order of 801 each time you
press.
No function is assigned.
Slides the video fader to the top edge or bottom edge.
Switches the video between A/PGM bus and B/PST bus as a cut.
Adjusts the density (output level) of the video that is processed by the visual
effect A.
Adjusts the density (output level) of the video that is processed by the visual
effect B.
Turns the [OUTPUT FADE] knob counterclockwise.
Turns the [OUTPUT FADE] knob clockwise.
Switches the output video to the specified still image.
Adjusts the volume of the specified input channel.
Adjusts the volume of AUDIO IN.
Adjusts the volume of AUDIO OUT.
Adjusts the volume of AUX bus.
* This is valid when "CTL/EXP TYPE" is set to "EXP. "
Displays the EXP CALIBRATE screen.
Following the direction on the screen, calibrate (adjust) the expression pedal.
The first time you use the expression pedal, be sure to execute calibration so
that the pedal will operate optimally.
In some cases, the expression pedal might no longer be operating optimally
because of the passage of time or the conditions of use. In such cases you
should also execute expression pedal calibration.
Explanation
This loads settings that are in a preset memory saved on a USB flash drive.
When you press the [VALUE] knob, a list of the files in the USB flash drive
appears.
When you select the file that you want to recall and press the [VALUE] knob,
the contents of this unit are overwritten.
Saves the current settings as a file on the USB flash drive.
When you press the [VALUE] knob, a list of the files in the USB flash drive
appears.
If you are saving as a new file, select "NEW FILE... " and enter a file name.
If you are overwriting an existing file, select that file in the list.
When you press the [VALUE] knob, the file is saved to the USB flash drive.
Formats the USB flash drive.
When you press the [VALUE] knob, format is executed.