Advertisement
Operation
Plug the cord into the power supply to go on standby mode.
Press Power button to turn the machine ON/OFF.
Press Max to set the purifier to the maximum speed. It will run
on Max for 60 minutes before returning to the original running
mode.
Press Speed to manually adjust the fan speeds from 1 –4 (sleep,
low, medium, and high).
Press AUTO button to switch your purifier to auto mode. In
auto mode, the air purifier will automatically adjust based on
the real-time PM 2.5 Index.
Press Light button to turn the air quality lindicator light
ON/OFF.
Filter Reset: To reset the filter change reminder
after placing in new filters, press and hold the
AUTO and Timer button for 3 seconds
simultaneously.
11
Hide quick links:
Advertisement
Need help?
Do you have a question about the HSP002 and is the answer not in the manual?
Questions and answers
Why does the timer light stay blue
We love our filter but recently it doesn't seem to be filtering the air as it did. We have changed the filter and unplugged and plugged back in. It's running. It used to go up and down depending on what we were cooking but isn't anymore. Anything we are overlooking? Thanks
The HATHASPACE HSP002 air filter may stop adjusting its performance after changing the filter due to improper installation. Ensuring the filter is securely in place and properly aligned is essential. Additionally, the air sensor may need time to recalibrate after a filter change. If the issue persists, resetting the unit by powering it off and on might help restore normal operation.
This answer is automatically generated
HATHASPACE HSP002
HATHASPACE HSP002 keep beeping and I don't know how to stop it.
Why the orange light won’t go off on the purifier
Why won’t the orange light go oss
Turn off beeping sound
Why are the auto and timer buttons flashing
The auto and timer buttons on the HATHASPACE HSP002 may be flashing because the filter replacement reminder is active. To reset the reminder, hold the AUTO and TIMER buttons at the same time for 3 seconds.
This answer is automatically generated