Page 2
Dear Customer When the frame is When the frame is horizontal vertical About the Upgrade of the D-LUX5 Firmware The following functions were added or changed from Move Switch to Ver. 1.0 of the firmware. Please read this leaflet in (up and down) conjunction with the instructions for the camera.
Page 3
This allows brightness, color, or red or blue tint of the • Approximately of the time period is recorded. monitor/an external viewfinder (Leica EVF1, optional) (If you record for 10 minutes, the resulting motion to be adjusted. picture recording will be approximately 1 minute long.) The displayed available recording time is approximately 10 times.
Page 4
• • Some subjects may appear differently from actuality The setting is fixed to [OFF] in the following cases. – on the LCD monitor/the external viewfinder. However, When recording motion pictures/[BURST]/ this does not affect the recorded pictures. [AUTO BRACKET]/[ASPECT BRACKET]/ •...
Page 5
The position and size of the AF area you have set When [MF] is set, you can make fine adjustments to are now stored. the focus using a simpler operation than before. The AF area settings you make by changing the After focusing using one shot AF, the MF Assist screen position and size of the AF area with [Ø] in is now displayed automatically.
Page 6
Leica Camera AG / Oskar-Barnack-Straße 11 / D-35606 SOLMS / DEUTSCHLAND Telefon +49 (0) 6442-208-0 / Telefax +49 (0) 6442-208-333 / www.leica-camera.com...
Need help?
Do you have a question about the D-LUX 5 and is the answer not in the manual?
Questions and answers
howto reset to to factory configuration