Summary of Contents for Dreamline AQUALUX SHDR-3348588 Series
Page 1
Please read these instructions carefully before installing. If you have any questions regarding installation, please contact our technical support specialists Monday through Friday 8:00 AM – 7:00 PM EST at Phone: 1-866-731-2244, Fax: 1-866-857-3638 or e-mail our technical support group at Support@DreamLine.com For more information about DreamLine Shower Doors &...
Page 2
DreamLine will not replace any damaged products or missing parts free of charge after ® 3 business days or if the product has been installed. Feel free to contact DreamLine if you have ® any questions, and please provide an order number, job name or other proof of purchase to help us identify your original order.
Page 3
Before discarding the carton, check for small hardware bags that may have fallen to the bottom of the box. If any parts are damaged or missing, please contact DreamLine for replacement. The shipping boxes may contain extra parts not used in ®...
Parts diagram Description Description Part # Part # Stationary glass Round head screw ST4.2×55 2pcs Support bar Flanged Side strip Hinge 2pcs Bottom anti-water strip Glass door Bottom bracket Handle Round head screw ST4.2×30 2pcs Wall Bracket Countersunk screw ST4.2×40 Wall Anchor 3pcs AQUALUX manual Ver 2 Rev 4 02/2016...
Installation steps Assemble the Wall brackets (06) onto the Stationary glass (01). Use the at least one of the supplied gasskets on each side to protect the glass. See Fig 1 for details outside Fig 1 Carefully place the Stationary glass (01) onto tub surface.
Page 6
Outline the position of the Wall brackets (06) on the wall from inside of the shower area. Set the Stationary glass (01) aside. inside Remove the Wall brackets (06) from the Stationary glass (01). Place the brackets back to the outlined outside positions and mark holes for drilling.
Page 7
Mark the drilling hole on the threshold for the Bottom bracket (11). Set the Stationary glass (01) aside. Drill a hole into the tub surface using an Ø1/8” drill bit and fasten the Bottom bracket (11) to the tub surface using the Truss head screw ST4.2×30 (12). Ø...
Page 8
Locate the Support bar (02). Position the Support bar (02) at an angle (ideally 45°) between the glass and the wall. Level it Ø 5/16” horizontally. Hold it firmly and outline the bracket’s position on the wall. Remove the Support bar (02) and detach the wall bracket from it.
Page 9
Fig 9 Install the Handle (05) onto the outside of the Glass door (04) only. Make sure to use the supplied gaskets and sleeves to protect the glass. Attach the Bottom anti-water strip (10) over the bottom edge of the Glass door (04). See Fig 10 for details inside Fig 10...
Page 10
Take three measurements: • from the top edge of the Glass door (02) to the top of the center portion of the top Hinge (06) (see Fig 11.1 for an example to use for all three measurements) • from the bottom of the center portion of the top Hinge to the top of the center portion of the bottom Hinge (06) •...
Page 11
Apply good quality mildew-resistant silicone along the connection of the stationary glass with the wall and the tub surface. Allow 24 hours for the silicone to fully cure before using the shower. See Fig 13 for details Hours Fig 12 AQUALUX manual Ver 2 Rev 4 02/2016...
Product Maintenance BASES and BACKWALLS: To ensure a long life for your acrylic back walls: wipe them off after each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or dull the surface.
Page 13
TEL: 866-731-2244 FAX: 866-857-3638 DREAMLINE.COM For more information on DreamLine Shower Doors and Enclosure please visit DreamLine.com ®...
Need help?
Do you have a question about the AQUALUX SHDR-3348588 Series and is the answer not in the manual?
Questions and answers