Maintenance and service
6. fuel systeM
►
fuel systeM
Use only low sulfur or ultra low sul-
fur diesel fuel.
(1) fuel tank
Fuel tank
nOte
•
If foreign materials, such as
dust and sand, or water are
mixed in fuel, it can deteriorate
the performance of the fuel in-
jection pump. Make sure to add
quality fuel through the strainer.
5 - 1
T474NH-영문-05(마).indd 12
Bleeding screw
(2) how to bleed fuel system
It is necessary to bleed the system
under the following conditions.
T39O514A
- The engine is stopped due to the
empty fuel tank.
- The filter or pipe is removed.
① Unscrew the bleeding screw.
② Start the engine.
③ When clean fuel flows out of the
bleeding screw, tighten the screw.
④ Repeat the procedure if the system
is not bled completely.
(3) f u e l f i l t e r c l e a n i n g a n d
element replacing
This filter is to remove foreign mate-
rial and water from fuel.
① Set the fuel filter cock to the 'OFF'
position.
② Loosen the ring screw on top of
the cap to remove the cap. Then,
③ Flush the element with diesel fuel
T4HO504A
to remove any foreign material
from it.
④ If the element is severely contami-
nated, replace it with a new one.
nOte
•
Replace the fuel filter every
500hrs ofter replacing it at first
50hrs.
2019-08-16 오전 11:30:38
Need help?
Do you have a question about the T474 and is the answer not in the manual?
Questions and answers
How do I pull the battery out of a 474
Turn the ignition switch to the "OFF" position and then remove the battery from the tractor.
This answer is automatically generated
@Mr. Anderson thanks. To clarify, there is part of muffler system and bracket to take apart unless there is an easier way. That’s the question I’m hoping to find an answer for.
Where is the solenoid located on tym t474?