Advertisement
2. To decrease the blade angle, turn the blade
adjustment knob counterclockwise.
To stop the product
1. Release the clutch control.
a) BG 245, BG 375 (H5-BC):
b) BG 475, BG 375 (H6-BC, H9-BC):
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
For all servicing and repair work on the product, special
training is necessary. We guarantee that professional
repairs and servicing is available. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
12
2. Immediately set the throttle control to idle speed and
let the engine operate at idle speed for 2–3 minutes.
3. Set the engine ON/OFF switch to "OFF". The engine
stops.
4. Move the fuel valve to the "OFF" position.
Maintenance
For spare parts, speak to your Husqvarna dealer or
service agent.
Maintenance schedule
* = General maintenance done by the operator. The
instructions are not given in this operator's manual.
X = The instructions are given in this operator's manual.
O = Refer to the engine manual for instructions.
1071 - 001 - 11.12.2019
Advertisement
