Advertisement
For PVM-20S1WE/20S1WU
1 Fasten the cables to the monitor with
the installed cable clamp.
2 Install the supplied cable clamp (ø11) .
1
3 Wind the cable connected to the D
board to the supplied ferrite core
(large) by two turns and fasten the
cable with the cable clamp.
Ferrite core
(large)
Wind by
two turns.
Cable clamp (ø11)
2
For PVM-20S1WA
1 Fasten the cables to the monitor with
the installed cable clamp.
Cables
2 Close the D board.
D board
3 Install the supplied cable clamp (ø11)
and wind the cable connected to the D
board to the supplied ferrite core
(large) by two turns and fasten the
cable with the cable clamp.
The installation method is the same as
that in steps 2 and 3 for the PVM-
20S1WE/20S1WU on the left column.
Continue
9
Advertisement
