Advertisement
Available languages
Available languages
Auger Bolt Pin Kit
Power Max
Model No. 133-2576
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Bolt (5/16 x 2-1/2 inches)
Spacer
Locknut (5/16 inch)
Bolt (1/4 x 2 inches)
Locknut (1/4 inch)
Installing the Kit
1. Shut off the engine and secure the machine from movement before you begin to work on it.
2. Replace bolts, spacers (if applicable), and locknuts as needed; refer to
1. Locknut (5/16 inch)
2. Spacer
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Heavy Duty Snowthrower
Qty.
2
2
2
Install the kit.
2
2
Figure 1
3. Bolt (5/16 x 2-1/2 inches)
4. Locknut (1/4 inch)
Register at www.Toro.com.
Form No. 3408-329 Rev C
Installation Instructions
Use
Figure 1
for the appropriate orientation.
5. Bolt (1/4 x 2 inches)
Original Instructions (EN)
All Rights Reserved *3408-329* A
Printed in the USA
g186563
Advertisement
