Advertisement
Quick Links
Advertisement
Related Manuals for Star Trac FREERUNNER 10-TRx
Summary of Contents for Star Trac FREERUNNER 10-TRx
- Page 1 Core Health & Fitness 10-TRx FREERUNNER ASSEMBLY MANUAL...
-
Page 2: Important Safety Instructions
Read all warnings posted on the machine. Health related injuries may result from incorrect or excessive use of exercise equipment. STAR TRAC strongly recommends you to encourage your members to discuss their health program or fi tness regimen with a health care professional, especially if you or they have not exercised for several years, are over 35, or have known health conditions. -
Page 3: Product Spotlight
PRODUCT SPOTLIGHT 9-9271 110V 9-9274 220V CE/UL/FCC/CSA 10-TRx Treadmill Overall Weight Width Length Height Belt Width Max User Weight 494 lbs (224 kg) 35 in (90 cm) 89 in (226 cm) 57.3 in (146 cm) 21.5 in (55 cm) 0-500 lbs (0-226 kg) Page 2... - Page 4 Description 715-4254-XX ASSY, HANDRAIL, W/HB, DECK, FLEX, TREADMILL 020-7911 BEAUTY RING, HANDRAILS, 150X50 020-7854-XX RAIL, UPRIGHT, FLEXDECK, RIGHT 020-7853-XX RAIL, UPRIGHT, FLEXDECK, LEFT 110-4055 SCREW, M10x1.5, 20mm, HHC, HE, AS, NKL, FL, Gr-10.9 140-3683 GROMMET, RT, HANDRAIL, DECK, FLEX, TREADMILL 140-3684 GROMMET, LT, HANDRAIL, DECK, FLEX, TREADMILL 715-4257-XX...
- Page 5 Unpack all parts and inspect for damage. Route the wires through the beauty ring (020- 7911) (BE CAREFUL OF ORIENTATION) and down through the right side upright handrail (020-7854-XX). NOTE: The holes in the upright handrail need to face inward toward the running belt. Install the upright handrail into the handrail assembly (715-4254-XX) and use a ratchet wrench with a 15mm socket to secure using four...
- Page 6 Carefully lay the handrail assembly built in Steps 3-5 onto the deck on its right side, then route the wires from Step 2 into the frame. Use a ratchet wrench with a 19mm socket to adjust the frame wedge bolts to ensure the gap 63.00 mm between the wedge and the frame is 63mm.
- Page 7 DATA SUP PWR COAX CSAFE After routing the cable bundle into the motor compartment, connect the cables to the corresponding connections both on the motor control board (MCB) and the CSAFE and COAX cables. SUP PWR COAX DATA CSAFE Have one person lift upwards on the handrail assembly while the other person uses a torque wrench with a 19mm socket to lock the handrail assembly to the frame by tightening the bolts...
- Page 8 Use a #2 phillips screwdriver to remove the four screws securing the side-bed covers to the frame, then lift the side-bed covers up. NOTE: The screws are angled, take care when reinstalling the hardware as to not strip the screws. With the side-bed covers lifted, install the motor shroud (715-4257-XX), then use a #2 phillips screwdriver to secure the motor shroud to the...
- Page 9 Before plugging in the treadmill, ensure it is moved to its fi nal position and level the treadmill by using a 9/16” open-ended wrench to adjust the four (4) leveling feet [1]. Once the treadmill is level, use a 3/4” open-ended wrench to tighten the lock nut [2] on each foot to ensure the foot is locked into place.
-
Page 10: Console Installation
CONSOLE INSTALLATION NOTE: Depending on which console was purchased, the install instructions could be diff erent - please see console owner’s manual for additional information. Use a #2 phillips screwdriver to secure the back console shroud to the console mount using ten (10) pieces each of the #8-18 x 3/4”... - Page 11 Install the power cord into the machine and plug the other end into the wall outlet, then push the power breaker to the on position. WARNING: To reduce the risk of electrical shock, fi re, or injury to persons, the installer must ensure that the treadmill is connected to a dedicated power line having an outlet with the same confi guration as that of the plug:...
-
Page 12: Support And Service
SUPPORT & SERVICE CORE Get world class support for all brands with our new support portal, Core Connect. Get help with your general inquiries, warranty registration, preventative maintenance, service requests and parts orders. You can CONNECT also make seamless service requests, get real time updates, manage your assets and intuitively order parts for all brands direct from the site. - Page 13 © 2019 CORE HEALTH & FITNESS, LLC PART NUMBER 620-8683, REV A...
Need help?
Do you have a question about the FREERUNNER 10-TRx and is the answer not in the manual?
Questions and answers