Routing An Input To A Track Using A Bus - Yamaha AW2816 Manual

Channel.
Routing a Monitor / Playback Channel to an Internal Effects Processor
Any or all Tracks can be routed through the two Effects Processors in the AW2816. Since all Tracks
''share'' the two Effects Processors, it is not possible to have each Track routed to a different, or
dedicated, Effect simultaneously.
1) Press the [RECORDER 1-8] or [RECORDER 9-16] key in the 'MIXING LAYER' section, to select
the desired Mixing Layer for the playback channels.
2) Press the [AUX 5] (EFF1) or [AUX 6] (EFF2) button in the 'MIXER' section, and raise the faders of
any channels that are to be sent to the effects processor.
NOTE: The higher a Track fader is raised, the greater the amount the Track will be ''effected''.
3) Press the [HOME] button in the 'MIXER' section.
4) Adjust the Effects Return levels with the Blue RTN 1 and RTN 2 knobs as desired.
Routing an Input Channel to an Internal Effects Processor
Any or all Tracks can be routed through the two Effects Processors in the AW2816. Since all Tracks
''share'' the two Effects Processors, it is not possible to have each Track routed to a different, or
dedicated, Effect simultaneously.
For routing an input channel to effects unit 1
1) Press the [1-8] 'INPUT' key in the 'MIXING LAYER' section.
2) Press the [AUX 5] (EFF1) or [AUX 6] (EFF2) key in the 'MIXER' section, and raise the faders of any
input channels that are to be sent to the effects processors.
NOTE: The higher a Track fader is raised, the greater the amount the Track will be ''effected''.
3) Press the [HOME] button.
28