Epson RC620+ Manual page 74

Maintenance 4. Maintenance Parts Replacement Procedures
(4) Loosen the two screws on the side of the front side.
(5) Open the front cover and hold it open.
(6) Open the clamp for the front cover support bar.
Push the latch A shown in the photo first and
NOTE

then open the clamp.
(7) Insert the top of the support bar into the support
hole as shown without moving the base point.
62
Motor Driver
1: Axis 1
2: Axis 2
3: Axis 3
4: Axis 4
A
1
2
3
4
Front Cover
Support Bar
Base Point
Support Hole
RC620DU Rev.5