Johnson Relax Model Double Instructions For Use Manual page 12

nical assistance center to replace the control.
If the cord cannot be removed, the bed warmer
must be disposed of.
Recommendation: do not leave the bed warmer
in use unnecessarily.
Do not place the the control under the pillow or
between sheets or blankets when the appliance
is connected.
Check the appliance frequently for signs of
wear or deterioration. If there are signs of wear
or deterioration, or if the appliance is damaged
or has obvious malfunctions, contact an autho-
rized technical assistance centre before use.
The appliance can be used to heat the bed, but
must be switched off and disconnected from
the power supply before going to bed.
CAUTION
Place the bed warmer only between the mat-
tress and the first sheet and not over the per-
sons in bed.
If the appliance is used on an adjustable bed,
check that the bed warmer and the power cord
are not trapped or blocked, for example in the
hinges.
Do not operate the bed warmer when there are
obvious folds.
Do not insert pins or needles. Do not use pins,
12