Installing The Refrigeration Appliance In A Run Of Kitchen Units - Miele KFN 16947 D ed/cs Operating And Installation Instructions

Installation
Aligning the appliance
 To align the appliance, adjust the
front feet using the spanner supplied.
If necessary, also align the two rear
adjustable feet using the two front ad-
justing devices  (located beside the
front adjustable feet).
 Turn the adjusting device clockwise
using a socket wrench  to raise the
appliance up at the back.
70
Levelling the appliance door
SW19/10
 Ensure that you unscrew the ad-
justable foot  from the lower hinge
plate with the enclosed spanner until
it sits on the floor. Then unscrew the
foot by a further ¼ turn.
SW5
Installing the refrigeration appliance
in a run of kitchen units

insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the com-
pressor will run more frequently and
for longer periods. This will result in
increased energy consumption and a
higher operating temperature for the
compressor. This may, in turn, cause
damage to the compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must not be covered or blocked in
any way.
Risk of fire and damage due to