Door Opening Angle Limiter; Fitting Wall Spacers Supplied; Installation - Miele KFN 16947 D ed/cs Operating And Installation Instructions

Door opening angle limiter

The opening angle of the appliance
doors can be limited to approx. 90° or
110° using the door opening angle lim-
iter. This will prevent an appliance door
from hitting an adjacent wall and being
damaged when opened, for example.
The door opening angle limiter is avail-
able from Miele or your Miele dealer.

Fitting wall spacers supplied

The wall spacers supplied must be
used in order to achieve declared en-
ergy consumption values and to pre-
vent the build-up of condensation at
high ambient temperatures. Appliance
depth is increased by approx. 35 mm
with the wall spacers fitted. If the wall
spacers are not used the functionality
of the appliance is not affected. En-
ergy consumption is only slightly in-
creased with less distance between
the appliance and the wall.
 Fit the wall spacers onto the back of
the appliance on the top left and
right.

Installation


Two people are required for in-
stalling the appliance.

The appliance must be empty
when it is installed.

Move the appliance carefully on
floors that are sensitive to scratching
to prevent damage.
For easier installation there are trans-
port handles on the back at the top
and transport wheels underneath the
appliance.
 Prepare the appliance for installation
as close as possible to its intended
installation location.
 Connect the appliance to the electri-
city supply as described in "Electrical
connection".
 Move the appliance carefully to its in-
tended installation location.
 Position the appliance with the wall
spacers (if used) or the back close to
the wall.
Installation
69