Husqvarna 322HD60 Workshop Manual page 45

4. Remove the fuel hoses from the fuel tank.
5. Install in the opposite sequence.
7.15.3 To clean and examine the fuel filter
1. Remove the fuel tank cap.
2. Pull the fuel hose and the fuel filter from the fuel tank
with the fuel filter hook. Remove the fuel filter.
3. Examine the fuel hose for cracks and leaks.
4. Clean the fuel filter with a brush. If the fuel filter
cannot be fully cleaned, replace it.
5. Make sure that the connection neck of the fuel filter
is put as far as possible into the fuel hose.
1369 - 001 - 13.02.2020
6. Put the fuel filter in the tank as shown in the
illustration.
Note: The illustrations show a different tank type, but
the procedure is the same.
7.15.4 To clean and examine the fuel tank
1. Examine the fuel hose for damages.
2. Examine the fuel tank for cracks.
3. Clean the fuel tank.
7.15.5 Fuel tank cap
The fuel tank cap cannot be repaired. If the engine stops
after a short period of time or if the O-ring on the fuel
tank cap is damaged, the fuel tank cap must be
replaced.
Repair instructions - 45