Husqvarna 322HD60 Workshop Manual page 42

b) Clutch side.
2. Put the ball bearing in the crankcase. Carefully tap
the removal tool for the ball bearing, refer to
Servicing tools on page 10 , with a rubber hammer
until the ball bearing is in position. Make sure that
the ball bearing are against the snap ring.
a) Flywheel side.
42 - Repair instructions
b) Clutch side.
3. Put the sealing ring in the crankcase half on the
flywheel side.
1369 - 001 - 13.02.2020