Four Corner Adjustment - A&D AD4329A-DLC Instruction Manual

6.5. Four corner adjustment

The example shown in the figure is when the weighing scale is built using four digital
load cells.
Press [PRINT].
Put the adjustment weight on the 1st digital load cell.
When the MD mark illuminates, press [PRINT] to execute corner
adjustment for 1st digital load cell.
Press [PRINT].
Put the adjustment weight on the 2nd digital load cell.
When the MD mark illuminates, press [PRINT] to execute corner
adjustment for 2st digital load cell.
Execute corner adjustment for all of the load cells connected
by using the same procedure.
After that, the display proceeds as shown in the example at
the right.
Page 19
Previous page
lC1adj
1000. 0
Execute
lC2adj
1000. 0
Execute
lC3adj
4C end
For 2 seconds
Cal 0
Next page
AD4329A-DLC