Changing Connecting Pcs - Hitachi SV.LINK User Manual

4.4 Commands (S-7895-29 Version 02-00 or later)

4.4.1 Changing Connecting PCs

Function: Specify the communication type between PCs and personal computers.
Operation: The operation procedure is described below.
(1) Select the type of communication between PCs and personal computer in the ET.NET system
startup window.
• RS-232C connection
Click the [RS-232C] radio button and select a [Communication port] from the menu that
pulls down.
• Ethernet connection
Click the [Ethernet] radio button and enter the IP address of the PCs that is connected.
(2) Click the OK
will then appear.
The "Search of Station No." is a function dedicated to SV.LINK (LQE720). This
function is not available for ET.NET (LQE521).
button when the setup has completed. The [Setup by module] window
NOTICE
4-11
4 OPERATION