Panasonic CF-P1 Series Supplementary Instructions Manual page 4

Connecting to Wireless LAN
After finishing the first-time operation, make a connection setting for Wireless LAN
using the following procedure.
Automatic network detection
A connection manager periodically scans wireless networks for available connections. If
any networks are detected and no networks are connected yet, the connection manager
will try to connect with a more favorable network first. If such a network cannot be used
or the connection manager cannot connect with any suitable network due to an invalid
WEP key, the connectivity bubble (A) is displayed for manual network connection. (
below)
If you don't see the suitable network, tap [Settings] (
detailed configuration window.
NOTE
If the connection manager is able to connect to a network automatically, the connec-
tivity bubble (
page 5 step (3) to access the connection manager.
Connect to a wireless LAN
(1) Select a network to connect to and what the network
will connect to, then tap [Connect] from the connec-
tivity bubble.
(2) If the connectivity bubble pops up as shown at right,
enter the WEP key, then tap [Connect].
4
below) will not appear, and you can follow the steps described in
page 5, step (3)) to display the
(A)